SpecsEveryday
ArticleBy The Specs Everyday editorsOctober 17, 2026

What the Wi-Fi 7 numbers on the box mean for a normal home

What the Wi-Fi 7 numbers on the box mean for a normal home

A Wi-Fi 7 mesh box carries a dozen numbers, and most shoppers read the biggest one. That is the wrong one. The BE10000 or BE14000 label is a sum of three per-band maximums that no device will ever see at once. The numbers that decide whether a system fits a normal home are the Ethernet port speed and the per-unit coverage, followed by the device count and the subscription price. This note explains each figure using the spec sheets of four current systems, the TP-Link Deco BE63, Amazon eero Pro 7, Netgear Orbi 770 Series and ASUS ZenWiFi BT8, all read from official pages on October 16, 2026. We did not run any of them; this is a reading guide, not a test.

What this note covers, in order.
What this note covers, in order.

The BE number is a sum, not a speed

Amazon eero Pro 7's public homepage, captured automatically on October 16, 2026. Not a logged-in account; the page may have changed since.
Amazon eero Pro 7's public homepage, captured automatically on October 16, 2026. Not a logged-in account; the page may have changed since.

BE10000, BE11000 and BE14000 are marketing classes. The maker adds the maximum link rate of each band and rounds. TP-Link lists the Deco BE63 at 5,188 Mbps on 6 GHz, 4,324 on 5 GHz and 574 on 2.4 GHz; those add to 10,086 by our arithmetic, which becomes BE10000.

ASUS lists the ZenWiFi BT8 at 8,643, 4,323 and 688 Mbps, a sum of 13,654 rounded up to BE14000. Netgear lists the Orbi 770 as BE11000 and up to 11 Gbps without a per-band breakdown. eero lists the Pro 7 as up to 3.9 Gbps for the whole unit and does not use a BE class at all.

A phone connects to one band at a time, or with Multi-Link Operation to two. It never uses all three at full rate. The BE number tells you how much total airtime the system has to share, which matters with many devices; it does not tell you how fast any one of them will go.

320 MHz and 4K QAM are the real Wi-Fi 7 upgrades

The Wi-Fi Alliance, which certifies the standard, states that 320 MHz channels available in the 6 GHz band provide twice the throughput of Wi-Fi 6, and that 4K QAM achieves 20% higher transmission rates than Wi-Fi 6's 1024 QAM. Those two features are where the per-band numbers come from.

The catch is in the words 6 GHz band. 320 MHz channels only exist there, and 6 GHz has the shortest range of the three bands. Netgear footnotes that the Orbi 770's 6 GHz band is limited to indoor range. The biggest number on the box applies to the band that reaches the fewest rooms.

TP-Link and ASUS state 320 MHz support in writing. Netgear and eero do not mention channel width on their product pages, though both are Wi-Fi 7 systems. When a maker does not print a figure, we say so rather than assume it; see the TP-Link Deco BE63 review and the ASUS ZenWiFi BT8 review for the full published lists.

MLO is the number without a number, and it matters most in a mesh

Multi-Link Operation lets a device, or a mesh node, use more than one band at once. The Wi-Fi Alliance describes it as supporting more efficient load balancing of traffic among links, with higher throughput and reliability. There is no Mbps figure attached, which is why it gets less box space than it deserves.

In a mesh, the link between nodes is the bottleneck. TP-Link states the Deco BE63 combines wired and tri-band Wi-Fi 7 links with MLO between units. ASUS states its Smart AiMesh backhaul aggregates or switches bands using MLO. eero states MLO support. Netgear's answer is architectural: a dedicated backhaul band instead.

For a buyer, MLO on the box means the satellites should hold a steadier link than Wi-Fi 6 mesh kits did. It does not mean a specific speed, and ASUS notes that supported MLO modes vary by client device.

The Ethernet port number is the one that caps your internet plan

This is the figure that most often decides the purchase and is most often skipped. Your internet plan enters the house through one port. If that port is 2.5 Gbps, a 5 Gbps plan is wasted.

The Deco BE63 lists four 2.5 GbE ports per unit, with only one acting as WAN at a time. The Orbi 770 lists 2.5 GbE on every port of router and satellites. The ZenWiFi BT8 lists one 2.5G WAN, one 2.5G LAN and two 1G LAN. The eero Pro 7 lists two auto-sensing 5 GbE ports, and eero markets it for plans up to 5 Gbps.

The reading: for a plan of 2.5 Gbps or slower, which is most US homes, all four carry it. For 3 to 5 Gbps, only the eero Pro 7 does in this group. The eero Pro 7 vs TP-Link Deco BE63 comparison turns on exactly this line.

Square footage is a spacing guide with a footnote

Every coverage number on a box comes with conditions. TP-Link's 5,800 sq. ft. for a Deco BE63 2-pack was measured, per its footnote, in a 4,600 sq. ft. two-story drywall home with 2x2 MLO clients. Netgear's 8,000 sq. ft. for an Orbi 770 3-pack breaks down to 2,500 per unit on the tech-spec tab. eero lists 2,000 per Pro 7 unit; ASUS lists 5,900 for a BT8 2-pack and 3,000 for one unit.

Use the per-unit figure to space the nodes, and discount it for brick, plaster, concrete floors and detached rooms. A 3,000 sq. ft. house on two floors is within every 2-pack rating here; the same house with plaster walls and a basement office may need a third unit. The Netgear Orbi 770 Series review covers the large-house case.

The device count is a lab figure, and the makers disagree by half

TP-Link lists 200 devices for the Deco BE63 and footnotes that the figure comes from laboratory testing with mixed video, downloads, cameras and IoT traffic. eero lists 200+ per Pro 7 unit. Netgear lists 100 concurrent devices for the Orbi 770. ASUS publishes no device count for the BT8 on the pages we read.

Count your devices honestly: phones, laptops, TVs, speakers, bulbs, plugs, cameras, thermostats, consoles and the printer. A typical family lands between 30 and 80. All four systems are rated above that, but the 100 figure is the one to watch if you run a lot of smart home gear.

The subscription price is the number that is not on the box

Security features now sit behind plans. eero Plus is $9.99 a month or $99.99 a year, per eero's page, and covers advanced security, ad blocking, content filters, Malwarebytes, 1Password and a VPN. Netgear Armor is $99.99 a year ($149.99 for Armor Plus) after a trial of unstated length.

TP-Link's HomeShield has free basics and a paid advanced tier whose US price is shown only inside the Deco app, not on the web pages we read. ASUS lists AiProtection on the BT8 with no subscription price at all. Over three years, that is a roughly $300 difference between systems whose hardware prices are within $50 of each other.

The Amazon eero Pro 7 review and the Netgear Orbi 770 Series review break down what each plan includes.

Warranty years are the quietest number and the easiest to compare

eero lists 3 years for the Pro 7. The ASUS US eShop lists 3 years for the BT8 2-pack. TP-Link's US warranty page lists 2 years for the Deco family. Netgear's product page requires registration and purchase from an authorized reseller and shows the duration in an image we could not read on October 16, 2026.

For a device most households keep five years or more, one extra covered year is worth real money. It is the only number in this note that needs no footnote.

A reading order for the box

Read the numbers in this order and the choice usually makes itself.

Bottom line

Ignore the BE number until the end. Start with the port speed and the per-unit coverage, add the subscription and the warranty, and only then look at the radio figures. Read that way, the four systems above sort themselves: the Deco BE63 for most homes on plans up to 2.5 Gbps, the eero Pro 7 for faster plans and smart home hubs, the ZenWiFi BT8 for VPN users and the Orbi 770 for large homes with wireless backhaul.

Our ranked best mesh Wi-Fi systems for a normal house guide applies this order to all four. Every figure in this note was read from official pages on October 16, 2026; the sources are listed below and on our Routers and mesh topic page.

Sources